Xylem WTW SensoLyt 700, Operating Manual, Page: 8 / 26

Commissioning SensoLyt
®
700
8 ba15307e05 09/2020
3 Commissioning
3.1 Scope of delivery

SensoLyt
®
700 pH/ORP armature
The armature is equipped with a protective hood and protection
caps

Operating manual.
3.2 Installation
Caution
The SensoLyt
®
700 pH/ORP armature may only be submersed in
conjunction with a mounted combination electrode. When
exchanging the electrode, no moisture may get into the armature,
as otherwise the armature will be destroyed. Which electrodes
can be used together with the SensoLyt
®
700 pH/ORP armature is
given in section 6.1 C
OMBINATION ELECTRODES
.
Connection to the
measuring transmitter
The connection cable of the SensoLyt
®
700 is ready to be connected
to the terminal strip of a measuring transmitter with high-impedance
pH/ORP input. For all further information please refer to the operating
manual of the measuring transmitter. The assignment of the cable
wires of the SensoLyt
®
700 can be found in the chapter 8 T
ECHNICAL
DATA
of this operating manual.
Note
Do not suspend the sensor on the sensor connection cable. Use an
armature or electrode holder. Information on this and other
accessories is given in the WTW catalog and on the Internet.