Xylem WTW SensoLyt 700, Operating Manual, Page: 4 / 26

Overview SensoLyt
®
700
4 ba15307e05 09/2020
1 Overview
1.1 Structure of the SensoLyt
®
700 pH/ORP armature
Fig. 1-1 Structure of the pH/ORP armature (example, SensoLyt
®
700)
Note
The pH combination electrodes that can be used are available as
accessories (see chapter 6 R
EPLACEMENT PARTS AND ACCESSORIES
).
Impedance converter An impedance converter integrated in the armature shaft converts the
high-impedance measurement signal of the electrode into a low-
impedance signal. This ensures an interference-free signal
transmission even over greater distances.
Glass breakage
monitoring
The sensor is equipped with a SensCheck function for monitoring glass
breakage.
1.2 Recommended fields of application
In conjunction with the SensoLyt

SEA, SensoLyt

DWA and
SensoLyt

ECA pH combination electrodes as well as the SensoLyt

PtA ORP combination electrode, the SensoLyt
®
700 pH/ORP armature
is suitable for stationary pH or ORP measurement in the following
fields:
SensoLyt 700 Stationary measurements in water/wastewater applications.
SensoLyt 700 SW Stationary measurements in seawater and brackish water,
aquaculture.
1 Protective hood
2 Temperature sensor
3 Electrode (not contained in the scope of delivery)
4 Electrode receptacle
5 Armature shaft
1 2 3 4 5