Xylem WTW SensoLyt 700, Operating Manual, Page: 12 / 26

Measuring / Operation SensoLyt
®
700
12 ba15307e05 09/2020
4 Measuring / Operation
Note
Calibrate the measuring system after the initial commissioning and at
regular intervals (depending on the application).
4.1 Calibration
Why calibrate? During the operation of a pH electrode, the slope and asymmetry of the
electrode changes with time. The calibration procedure determines the
current slope and asymmetry of the electrode.
When to calibrate? Calibrate before measuring and at regular intervals (depending on the
application).
Calibration procedures The available calibration procedures depend on the measuring
transmitter used. The individual steps for the calibration are
comprehensively described in the operating manual of the measuring
transmitter.
4.2 Measuring
Warning
Contact with the sample can lead to danger to the user!
Depending on the type of sample, suitable protective measures
must be taken (protective clothing, protective goggles, etc.).
Please pay attention to:

the minimum immersion depth of the armature (> 40 mm)

the measuring range of the electrode used (see operating manual of
the electrode).