Xylem WTW OxiTop-IDS, Operating Manual, Page: 5 / 36

Multi 3630/3620 IDS Overview
ba77045e01 09/2019
5
1 Overview
Meters of the series MultiLine Multi 3630/3620 IDS can be wirelessly con-
nected to the OxiTop
®
-IDS measuring heads.
The OxiTop
®
-IDS measuring heads in conjunction with a Multi 3630/3620 IDS
meter add the following functions to the OxiTop
®
measuring system:
 wireless operation of several OxiTop
®
-IDS measuring heads at the same
time
 convenient examination of measurement data at the meter
 transmitting the measurement data to a PC
 BOD special functions
that cannot be carried out using the operating elements of the OxiTop
®
-IDS
measuring head
Prerequisites  Meter Multi 3630 IDS or Multi 3620 IDS
(with current software version, software update possible)
 Adapter WLM-M (for wireless connection to IDS sensors)
 OxiTop
®
-IDS (/B) measuring heads
Data exchange with
the OxiTop
®
-IDS
measuring head
OxiTop
®
-IDS measuring heads transmit the following data to the meter:
 Data of the OxiTop
®
-IDS measuring head
– ID
– Type designation of the OxiTop
®
-IDS measuring head (e.g. OxiTop
®
-
IDS)
– Series number of the OxiTop
®
-IDS measuring head
 Calibration data
 Measured data
 Measurement settings
The connection is established according to the same principle as
the wireless communication with sensors via the WLM adapters (for
details on the WLM system, see operating manual of the WLM sys-
tem).
Basic information on how to operate the meter is given in the oper-
ating manual of your meter.