Settings
Multi 3630 IDS
80
ba77170e03
10/2017
After the specified calibration interval has expired, the sensor symbol or the
QSC color scale flashes. It is still possible to measure.
Setting the
calibration interval
The calibration interval is set to 7 days (d7) in the factory.
You can change the interval (1 ... 999 days):
11.2 ORP measurement settings
11.2.1 Settings for ORP measurements
The settings are made in the menu for measurement settings of the ORP mea-
surement. To open the settings, display the required measured parameter in
the measured value display and press the
<ENTER>
key. After completing the
settings, switch to the measured value display with
<M>
.
Default settings are printed in
bold
.
11.3 D.O. measurement settings
11.3.1 Settings for D.O. sensors
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER>
key. After completing the set-
tings, switch to the measured value display with
<M>
.
To ensure the high measuring accuracy of the measuring system,
calibrate after the calibration interval has expired.
1
Open the menu for measurement settings with
<ENTER>
.
2
In the
Calibration
/
Calibration interval
menu, set the calibration interval
with
<
><
>
.
3
Confirm the setting with
<ENTER>
.
4
Quit the menu with
<M>
.
Menu item
Possible set-
ting
Explanation
mV resolution
0.1
1
Resolution of the mV display
Reset
-
Resets all sensor settings to the
delivery condition (see section
11.7.1).
