Xylem WTW Oxi 3310, Operating Manual

Page: 46 / 64

Operation Oxi 3310
46 ba75804e08 10/2017
4.8 Reset
You can reset (initialize) all sensor settings and sensor-independent
settings separately from each other.
4.8.1 Resetting the measurement settings
Note
The calibration data are reset to the default settings together with the
measuring parameters. Recalibrate after performing a reset.
The following settings for D.O. measurements are reset to the default
settings with the
Reset function:
The sensor settings are reset under the Reset menu item in the menu
for calibration and measurement settings. To open the settings, display
the required parameter in the measured value display and press the
<F1> /[Menu] or <ENTER> key.
Setting
Default settings
Cal. interval 14 d
Measured parameter D.O. concentration
Relative slope (S
Rel
) 1,00
Salinity (value) 0,0
Salinity (function) Off
Stability control On
Temperature unit °C