Xylem WTW Oxi 3310, Operating Manual

Page: 40 / 64

Operation Oxi 3310
40 ba75804e08 10/2017
Starting the automatic
storing function
To start the automatic storing function, select Continue with <

><

>
and confirm with <ENTER> . The meter switches to the measured value
display.
The active automatic data storing function can be recognized by the
progress bar in the status line. The progress bar indicates the remain-
ing storing duration.
Note
If the automatic storing function is activated, only the following keys are
active: Softkeys,
<M> , <STO
_
> and <On/Off> . The other keys and
the automatic switch-off function are deactivated.
Energy saving mode
([Eco mode])
If the automatic storing function is active, the meter provides an energy
saving mode ([Eco mode]) to avoid unnecessary energy consumption.
The energy saving mode switches off functions of the meter that are not
required for the automatic storing of measurement data (such as the
display). By pressing any key the energy saving mode is switched off
again.
Duration 1 min ... x min Storing duration.
Specifies after which time
the automatic data storing
should be terminated.
The lower limit of the stor-
ing duration is restricted by
the storing interval.
The upper limit is restricted
by the number of free
memory locations.
Menu item Possible
setting Explanation
O
2
7.92
mg/l
25.0
°C
0d03h00min
[SAL]
15.03.2014
08:00
Remaining storing duration
Graphical display of the
storing duration
Eco mode