Xylem WTW Multi 3430, Operating Manual

Page: 99 / 134

Operation
Multi 3430
99
ba75865e19 04/2015
The minimum duration until a measured value is assessed as stable is
the monitored time interval. The actual duration is mostly longer.
4.12.3 Settings
Settings The settings are in the menu for the measured parameter DPT. To
open it, display the parameter DPT in the measured value display and
press the
<MENU/ENTER> key. After the settings have been com-
pleted, use <M> to switch to the measured value display.
The possible settings are displayed individually for each sensor.
Default settings displayed in
bold .
Setting menu
Measured parameter Time interval Stability during the
time interval
Depth of immersion DPT 10 seconds
Δ
: better than 0.20 m
Menu item Possible
setting Explanation
Sal correction on
off
Manual salinity correction for
measurements of the immer-
sion depth.
Salinity 0.0 ... 70.0 Salinity or salinity equivalent for
salinity correction.
Reset - Resets all sensor settings of the
MPP 9x0 IDS multi parameter
probe to the default values (see
section 4.16.1)