Xylem WTW MPP 910 IDS, Operating Manual

Page: 7 / 18

MPP 9x0 IDS Operation
7 ba75981e02 12/2017
2 Operation
2.1 Opening and closing the plug connections
The following instructions apply to all actions where any components are con-
nected or disconnected (e.g. exchange of blind plug
⇌
sensor):
Opening the plug
connection
 If necessary, clean the plug connection
 Open the locking device (step 1)
 Use your thumb and index finger to press the clips of the connector
together, and pull the connector out of the plug (step 2).
Closing the plug
connection
 Make sure that the plug connection is completely dry and clean.
 Align the guidance of the connector with the groove in the plug and insert
the connector in the unlocked plug until it catches (step 3).
 Close the locking device (step 4).
2
4
3
1
Plug connection
closed and locked
Guidance
Groove