Xylem SonTek FlowTracker2, User Manual

Page: 41 / 308

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
40
3.3. Configuration Templates
Template Options 3.3.1
The Templates implemented in FlowTracker2 consists of the following template options.
The templates consist of number of configuration parameters required for performing
measurements in either
Discharge or General mode under the Measurement function.
•
Discharge Template
•
General Template
Templates are similar to configuration files where the operator defines the configuration
of the instrument, based on,
•
site details,
•
data collection requirements
•
quality control parameters,
•
measurement methods
(only for discharge mode)
.
The operator has the ability to create a unique configuration template for a single
monitoring site, region or organization.
It’s recommended that a unique template is created for each monitoring site. The
advantage of this is twofold, operator does not have to enter in the site number and
name for every measurement, and ensure that site number and name is consistent.
Managing Templates 3.3.2
Accessing Templates 3.3.2.1
Templates are stored separately from the measurement files on the internal memory of
the FlowTracker2 handheld and are managed from the Discharge or General Template
functions under the Device Configuration Menu. The following process describes how to
create, remove or select an existing template.
Templates for Discharge and General Modes can be
accessed from the Device Configuration menu,
a) To select a Template type,
i). Use up or down scroll arrows keys to select the
template,
ii). The template option selected will be highlighted
in yellow,
iii). Press the enter key to access the template
operating screen.
b) To navigate to Main Menu,
i). Press the Left Soft Key.
Figure 3:5 - Device
Configuration Menu