Xylem SonTek FlowTracker2, User Manual

Page: 32 / 308

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
31
If you selected a wrong language the menu functions can be a bit hazy! The following
steps will get you out of the gate.
i) the main menu must be displayed, ii) top menu option must be highlighted, iii) press the enter key two
times, iv) use left or right arrow key to select different language, v) press left soft key two times, vi)
handheld software will restart with new selected language.
Use Beeper 3.1.2
An internal speaker is available in the handheld to create a “ Beep ” after certain functions
are completed or warning thresholds exceeded in the handheld software.
a) The Beeper options implemented in FlowTracker2 are categorized under the
following,
i). Always,
ii). Major Events,
iii). Never.
b) Table 3:1 list the Beeper options and functions that will create a beep during
operations.
Table 3-1 – Beeper Options
Option Function
A
lwa
y
s
M
aj
or
E
v
ent
s
On startup
Maximum screen brightness
Measurement completed in point measurement view
Tilt exceeds threshold in point measurement
Automated BeamCheck completed
Warning present in Report
c) To change the Beeper option ,
i). Use the left or right arrow key to select Beeper option,
ii). Press the Left Soft Key to return to Configuration for the software to accept the
change.
Color Scheme 3.1.3
Color Schemes give the operator the ability to improve visibility of the LCD display
under different light conditions that may be experienced during field work.
a) Color schemes implemented in FlowTracker2 are categorized under the following
schemes,
i). Light,
ii). Medium,
iii). Dark.
b) To change the Color Scheme option ,
i). Use the left or right arrow key to scroll through the list of available color schemes,