Multi 3620 IDS
Operation
ba77169d06
10/2021
27
4.5.5 Example 2 on navigation: Setting the date and time
The meter has a clock with a date function. The date and time are indicated in
the status line of the measured value display.
When storing measured values and calibrating, the current date and time are
automatically stored as well.
The correct setting of the date and time and date format is important for the fol-
lowing functions and displays:
Current date and time
Calibration date
Identification of stored measured values.
Therefore, check the time at regular intervals.
7.
Open the setting mode for the
Language
with
<MENU/ENTER>
.
8.
Select the required language with
<
><
>
.
9.
Confirm the setting with
<MENU/ENTER>
.
The meter switches to the measuring mode.
The selected language is active.
Language:
Deutsch
Acoustic signal:
off
Volume
5
Illumination:
on
Kontrast:
50 %
Switchoff time:
1 h
Temperature unit:
°C
Stability control:
on
General
30.09.2012 08:00
Language:
Deutsch
Acoustic signal:
off
Volume
5
Illumination:
on
Brightness:
50 %
Switchoff time:
1 h
Temperature unit:
°C
Stability control:
on
General
30.09.2012 08:00
