Multi 3620 IDS
Operation
ba77169d06
10/2021
23
Forgotten the pass-
word?
Contact the administrator.
4.5
Navigation
4.5.1 Operating modes
4.5.2 Measured value display
In the measured value display, you can
use
<
><
>
to select one of several connected sensors. The selected
sensor is displayed with a colored background.
The following actions / menus refer to the selected sensor
open the menu for calibration and measurement settings with
<MENU/
ENTER>
(short keystroke)
Open the
Storage & config
menu with the sensor-independent settings with
<MENU/ENTER_>
(long keystroke, approx. 2 s).
change the display in the measuring screen with
<M>
(short pressure)
(e.g. pH
<−>
mV).
Using
<M_>
(long pressure, approx. 2 s), switch between operation with
IDS sensors and operation with OxiTop
®
-IDS (/B) measuring heads.
4.
Using
<
><
>
, select the menu item,
Change password
and confirm
with
<MENU/ENTER>
.
5.
In the
Password
field, enter the old password with
<
><
>
and
<
><
>
and confirm it with
<MENU/ENTER>
.
6.
In the
New password
field, enter the new password with
<
><
>
and
<
><
>
and confirm it with
<MENU/ENTER>
.
The password is changed. The login takes place. If a sensor is con-
nected the measured value display appears.
Operating
mode
Explanation
Measuring
The measurement data of the connected sensor are shown
in the measured value display
Calibration
The course of a calibration with calibration information, func-
tions and settings is displayed
Storing in
memory
The meter stores measuring data automatically or manually
Transmit-
ting data
The meter transmits measuring data and calibration records
to the USB-B interface automatically or manually (
USB
Device
).
Setting
The system menu or a sensor menu with submenus, set-
tings and functions is displayed
