en – Original instructions
40
e-IXPS - Installation, Operation and Maintenance Instructions
10
Declarations
Refer to the specific marking declaration found on the product.
10.1
EC Declaration of Conformity (Original)
Xylem Service Italia S.r.l., with headquarters in Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the product
Electric pump unit (see the label on the “Safety and Other Information” manual)
fulfils the relevant provisions of the following European Directives
•
Machinery 2006/42/EC and subsequent amendments (ANNEX II - natural or legal person
authorised to compile the technical file: Xylem Service Austria GmbH – Ernst Vogel-Strasse
2 - 2000 Stockerau - Austria).
•
Eco-design 2009/125/EC and subsequent amendments, Regulation (UE) 2019/1781 and
subsequent amendments [electric motor, 3 ~, 50 or 60 or 50/60 Hz, if IE2 (PN ≥ 0,12 and <
0,75 kW) or IE3 (PN ≥ 0,75 and ≤ 1000 kW) marked; variable speed drive (VSD), 3 ~, if IE2
marked], Regulation (EU) No 547/2012 and subsequent amendments (water pump, if MEI
marked).
and the technical standards:
•
EN ISO 12100:2010, EN 809:1998+A1:2009, EN ISO 14120:2015, EN 60204-1:2018.
•
EN 60034-30:2009, EN 60034-2-1:2007, EN 60034-30-1:2014, EN 60034-2-1:2014.
Signed for and on behalf of: Xylem Service Italia S.r.l.
Montecchio Maggiore, 23/06/2022
Marco Ferretti
Chairman of the Board of Directors
rev.00
EU Declaration of Conformity (n. 59)
1.
EMC - Apparatus/Product model:
see the label on the “Safety and Other Information” manual
RoHS Unique identification of the EEE:
IXP.
2.
Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy.
3.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
4.
Object of the declaration:
Electric pump unit (see product data plate).
5.
The object of the declaration described above is in conformity with the relevant Union
harmonization legislation:
•
2014/30/EU Directive of 26 February 2014 and subsequent amendments
(electromagnetic compatibility).
•
2011/65/EU Directive of 8 June 2011 and subsequent amendments, including the (EU)
2015/863 Directive (restriction of the use of certain hazardous substances in electrical
and electronic equipment).
6.
References to the relevant harmonized standards used or references to the other technical
specifications, in relation to which conformity is declared:
•
EN 61000-6-1:2007, EN IEC 61000-6-1:2019, EN 61000-6-2:2005, EN IEC 61000-6-
2:2019, EN 61000-6-3:2007+A1:2011, EN IEC 61000-6-3:2021, EN 61000-6-4:2007+
A1:2011, EN IEC 61000-6-4:2019.
•
EN IEC 63000:2018.
7.
Notified body: -.
