en – Original instructions
12
e-IXP(A), e-IXPC(A), e-IXPF(A) – Additional Installation, Operation and Maintenance Manual
2.2.1
Handling of the packed unit using a forklift truck
The Figure shows the types of packaging and the lifting points.
1.
Cardboard box with wooden base
2.
Wooden crate
2.2.2
Lifting with a crane
WARNING:
Use ropes, chains and/or slings (hereinafter referred to as "ropes"), hooks and/or clasps
(hereinafter referred to as "hooks"), shackles or eyebolts that comply with the applicable
directives and are suitable for use.
WARNING:
It is forbidden to use the shaft end and/or the motor eyebolts to move the unit.
NOTE:
Make sure that the harnessing does not hit and/or damage the unit.
WARNING:
Lift and handle the unit slowly to avoid stability issues.
WARNING:
During handling, make sure to avoid injury to people and animals, and/or damage to property.
Preparing the unit for lifting
1.
Depending on the model:
•
Attach the shackles to the eyelets, if any, and attach the ropes to the shackles,
or
•
Use the ropes to make a tie harness.
The figure shows how to harness and lift the different models.
1
2
