en – Original instructions
e-IXP(A), e-IXPC(A), e-IXPF(A) – Additional Installation, Operation and Maintenance Manual
11
2
Handling and Storage
2.1
Unit inspection upon delivery
2.1.1
Package inspection
1.
Check that quantity, descriptions and product codes match the order.
2.
Check the packaging for any damage or missing components.
3.
In case of immediately detectable damage or missing parts:
•
Accept the goods with reserve, indicating any findings on the transport document,
or
•
Reject the goods, indicating the reason on the transport document.
In both cases, promptly contact Xylem or the Authorised Distributor from whom the
product was purchased.
2.1.2
Unpacking and inspection of the unit
CAUTION: Cut and abrasion hazard
Always wear personal protective equipment.
1.
Remove the packaging.
2.
Ensure sorting of all packaging materials in accordance with the applicable regulations.
3.
Release the unit by removing the screws and/or cutting the straps, if fitted.
4.
Check the unit for integrity and to make sure that there are no missing components.
5.
In case of damage or missing components, promptly contact Xylem or the Authorised
Distributor.
2.2
Guidelines for transport
Precautions
WARNING: Crushing hazard
The unit and components are heavy: risk of crushing.
WARNING:
Always wear personal protective equipment.
WARNING:
Check the gross weight marked on the packaging.
WARNING:
Handle the unit in compliance with the current regulations on "manual load handling", to avoid
undesirable ergonomic conditions causing risks of back-spine injury.
