June 2022 – TD 320 OPERATING MANUAL – TURBIDITY SENSOR 4296
Page 81
Choose
File Output
from the list on
the left side. Check the
“Collect
data to file”
box to enable file
output. Select a file format either
XML or TXT and choose a base
directory where you want the file to
be saved.
Alternatively, you may select
“Continuously store the last
message in a single file”
if you
want to continuously store the last
message in a single file
Click
“OK”
in the
Advanced
Connection Settings
window, and
“OK”
in the
Connection Settings
window.
6.1.2 Starting the sensor and logging to file
Select your connection in the
connection list and then press
“Open Port”.
The Status turns
green when the sensor is
connected.
Click on the
“Control Panel…”
button in the lower right corner.
Figure 6-3: Advanced connection settings / File Output
Figure 6-4: AADI Real-Time Collector start up menu