Xycom XVME-653, Manual

Page: 49 / 113

Chapter 3 – BIOS Setup Menus
3-15
VMEbus Setup Menu
Using the VMEbus Setup menus, you are able to configure the XVME-653/658 VMEbus
master and slave interfaces.
This setup provides the following configurable items:
•
System Controller
•
Master Interface
•
Slave Interface
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Security VMEbus Exit
Item Specific Help
&
System Controller
&
Master Interface
If the line item you are viewing
Slave Interface:
has specific help, it will be listed
Slave 1&2 Operational Mode: [Programmable]
here.
&
Slave 1: [Off]
&
Slave 2: [Off]
&
Slave 3: [Off]
&
Slave 4: [Off]
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
&
Submenu F10 Previous Values
Figure 3-12 VMEbus Setup Menu
Table 3-12 VMEbus Setup Menu Options
Option Description
Slave 1 & 2 Operational Mode Selecting Programmable allows you to configure and enable VMEbus slaves
1, 2, 3, and 4.
When
Compatible is selected, the BIOS automatically configures and en-
ables VMEbus slaves 1 and 2. Compatible sets up the XVME-653/658 slave
interface so that it is compatible with older Xycom Automation VME PC proc-
essor boards which did not use the Universe chip.