Xycom XVME-653, Manual

Page: 45 / 113

Chapter 3 – BIOS Setup Menus
3-11
Integrated Peripherals Submenu
The Integrated Peripherals Submenu is used to configure the COM ports and the parallel
ports, and enable/disable the diskette, enhanced IDE controllers, and onboard BIOS.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Advanced
Integrated Peripherals Item Specific Help
UART1 port: [3F8, IRQ4]
UART2 port: [2F8, IRQ3]
UART3 port: [3E8, None]
If the line item you are viewing
UART4 port: [2E8, None]
has specific help, it will be listed
Parallel Port: [378, IRQ7]
here.
Parallel Port Mode: [Bi-directional]
Diskette controller: [Enabled]
Local Bus IDE adapter: [Primary]
Integrated IDE adapter: [Disabled]
On-board Expansion BIOS [Disabled]
&
32-Pin ROM Site
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
&
Submenu F10 Previous Values
Figure 3-8 Integrated Peripherals Submenu
Table 3-8 Integrated Peripherals Submenu Options
Option Description
UART1-4 Port Allows the COM port address and IRQ levels to be modified or disabled.
Parallel Port Select a unique address and interrupt request for the LPT port, or disable it. Auto
selects the next available combination.
Parallel Mode LPT port can be configured for Bi-directional or output only ( Standard ).
Diskette Controller Enables or disables the onboard floppy disk controller.
Local Bus IDE Adapter Enables or disables the onboard IDE controller.
Integrated IDE Adapter Enables or disables the secondary IDE controller.
Onboard Expansion BIOS Enables or disables the onboard expansion BIOS. The default is Disabled .