![XVTEC XVC-ULTRA User Manual Download Page 24](http://html1.mh-extra.com/html/xvtec/xvc-ultra/xvc-ultra_user-manual_891594024.webp)
XVC-ULTRA Encoder
User’s Guide
Page 24 of 50
4.3.2.2
RTP
Streaming
The following fields appear in the Streaming Settings section when you choose RTP streaming.
Figure 14: RTP Streaming Fields
The fields appearing on the page are described in the table below.
Table 15: RTP Streaming Field Descriptions
Field
Description
RTP Streaming Settings
Video RTP destination port
The destination video UDP port of the RTP stream.
Audio RTP destination port
The destination audio UDP port of the RTP stream.
RTP destination IP
The destination IP address of the RTP stream.
Note: RTP supports
unicast
and
multicast
transmission. To perform a
multicast transmission, use a multicast-dedicated IP address.
RTP SDP
The SDP (Session Description Protocol) file is generated automatically by the
encoder and contains information about the streaming parameters. The
player should open this file to display the stream.
NOTE
The RTP specification recommends selecting an even RTP port number, and the next higher odd number for
associated RTCP port. Note that XVC-ULTRA supports RTCP packets. Example RTP port selections:
* Video RTP destination port: 10000 (associated RTCP port number would be 10001 and 10002)
* Audio RTP destination port: 10004 (associated RTCP port number would be 10005,10006)
4.3.2.3
RTSP Streaming
RTSP supports streaming to a single client in unicast only. When a RTSP session is active, session
requests from other clients will be refused. The following fields appear in the Streaming Settings
section when you choose RTSP streaming.
Figure 15: RTSP Streaming Fields