11
8. SETUP Menu Functions
continued
8.7. MOTION DETECTION
<Option : OFF / ON>
This function alerts the user if motion has been detected within a user defined area:
• Switch to ‘ON’ and then press the setting button to enter its submenu. You
can create up to 4 motion detection areas by enabling ‘MONITOR AREA’ and
adjusting the ‘TOP/BOTTOM/LEFT/RIGHT’ slider separately. You can also adjust
the detection sensitivity. ‘BLOCK DISP’, when switched on, will highlight moving
objects in the scene with color blocks; when switched to ‘ENABLE ‘, it allows
you to enter a grid screen in which you will use the operation buttons to move
the translucent square and, by pressing the setting button, specify areas in the
scene that will not be detected (which then will become transparent). To exit the
grid screen, press and hold the setting button for 2 seconds before releasing it.
8.6. ATR
<Option : ON / OFF>
Similar to Wide Dynamic Range, ATR can compensate for gradation of the subjects
to the optimal level and thereby improve contrast in both bright and dark areas in
the picture. Switch on ATR and then press the setting button to enter its submenu.
Use the operation buttons to select ‘LUMINANCE’ or ‘CONTRAST’ and then adjust
the level to your preference.
MOTION DET
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
BOTTON
LEFT
RIGHT
RETURN
OFF
ON
ATR
CONTRAST
RETURN
LUMINANCE
MID
MID
