HD-SDI IR Bullet CAMERA
XHC1080VB
About this manual
O.S.D (On Screen Display) Menu
Dimensions (mm)
Weight
PRIVACY
Voltage
Power Consumption
Current Ampere
Operation temp
In storage temp
White Balance
2D, 3D-DNR
WDR/BLC/ACE
HLM(High light masking)
White Balance
MIRROR
-20 +70
140(H), 120(W), 254(D)
1.95Kg
Resolution
Scanning System
S/N Ratio
Shutter speed
Day & Night
Lens mount type
Lens type
OFF / H, V, HV MIRROR
32 ZONE / SIZE / COLOR
DC 12V
Max 6 [W]
IR OFF (280mA), IR ON(500mA)
0 +55
DC/Manual
Auto / Manual / Push
ON/OFF
ON/OFF
ON/OFF
AWB/ MANUAL/ PUSH LOCK
900 TV Lines
30/25P(1080P), 60/50P(720P)
More than 50dB
1/7 ~ 1/30,000sec
Auto/Day/Night(ICR)
f=2.8~10mm, F1.2
XHC1080VB
2.1M Pixels, HD-SDI Bullet Camera
1/3" 2M Pixels Progressive Sensor
1080P/720P
0.1 Lux @F1.2 Without DSS
0.00001Lux @F1.2 (LED ON)
Model name
Feature
Sensor
Effeiency pixels number
Min illumination
SMART IR
MOTION
DEFOG
D ZOOM DISPLAY
D ZOOM
INITIALIZATION
RS485
COLOR BAR
IMAGE REVERSE
IMAGE SIZE
INFORMATION
F/W VERSION
[1080p/30, 1080p/25, 720p/60, 720p/50]
[OFF,V,H,HV]
[OFF, ON]
[PROTOCOL, BAUDRATE(2400,4800,9600,14400,19200,115200),
ID(0~127)]
ENTER
HIGH LIGHT MASKING [OFF, ON]
[X1.0 ~ X4.0]
[OFF, ON]
[OFF, ON(0~10)]
[OFF, ON(SENSITIVITY (0~10), OBJECT DISPLAY (OFF, ON),
[OFF, ON]
[DEEPLY, CLEARLY]
[AUTO, AUTO_EXT, MANUAL(TEMPERATURE, RED GAIN, BLUE
GAIN), PUSH]
[TITLE SET, TITLE DISPLAY, TITLE COLOR]
Supports 32 Quantity masking area
[OFF, BLC, WDR]
[OFF, ON]
TDN DELAY TIME at the AUTO mode
[HIGH,MIDDLE, LOW, OFF]
[HIGH,MIDDLE, LOW, OFF]
[AUTO, NIGHT]
[0~20]
[0~20]
Flkless ON/OFF
Digital Slow Shutter limitation
Set the Exposure value [FULL, TOP, MIDDLE, BOTTOM]
[AUTO,COLOR-DAY,B/W-NIGHT,EXT_IN,EXT_OUT]
[0~20]
[0~20]
Exposure type [AUTO, MANUAL]
EXP-TPYE
EXPOSURE
BRIGHTNESS
[0~20]
EXP-AREA
DSS SPEED
FLKLESS
AGC
Auto Gain Control , [0~20]
MENU
SUB MENU
DESCRIPTION
Select to DC-IRIS Lens [IN_NORMAL, IN_DEBLUR, OUTDOOR1,
DC-IRIS
Lens TYPE
MA-IRIS
Select to Manual-IRIS Lens
INSTRUCTION MANUAL
EXIT MENU
CAM TITLE
WHITE BALANCE
TDN THRESHOLD
D&N MODE
DAY & NIGHT
IMAGE QUALITY
IMAGE TONE
SATURATION
SHARPNESS
3D DNR MODE
3D DNR
DNR
COLOR
TITLE&MASKING
ADVANCED FUNC
SYSTEM
CHANGE-DELAY
TDN MARGIN
H/L MASKING
ACE
BLC/WDR MODE
PRIVACY-MASKING
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for later reference.
TROUBLESHOOTING
Before sending the camera out for repair, check the items
below. If the problem persists after checking these items,
contact your service center.
If no image appears
Is the coaxial cable attached securely?
Are the power and voltage normal?
Has the iris of the lens inside the camera been
adjusted correctly (with the level volume) ?
Is there adequate illumination?
If the image is unclear
Is the lens in focus?
Is the lens dirty?
Dirt of fingerprints on the lens can adversely affect the
images. Gently wipe any dirt or fingerprints off the lens
with a soft cloth or lens cleaning paper and cleaning
fluid (commercially available).
Is the monitor adjusted correctly?
Do not open or modify
Do not open the cabinet exet during maintenance and
installation, as it may be dangerous and cause damages.
Do not put objects inside the unit
Make sure that no metal objects or flammable substances
get insdie the camera. It could cause fire, short-circuits or
damages.
Be careful when handling the unit
To prevent damage, do not drop the camera or subject
it to strong shock or vibration.
Install away from electric or magnetic fields.
Protect from humidity and dust.
Protech from high temperature
Be careful when installing colose to the ceiling , in a kitchen
or boiler room, as the temperature may raise to high levels.
Cleaning
Dirt can be removed from the cabinet only by wiping it
with a soft cloth moistened with a soft detergent solution.
Mounting Surface
The mounting surface material must be strong enough to
secure the camera.
PRECAUTIONS
SPECIFICATION
Feature
1.
Please open the DOME bubble case.
Opening notc h located rear side of dome camera base case.
2.
To adjust the focus, Spin the focus adjust lever on the Lens.
To adjust the zoom, spin the zoom adjust lever on the Lens.
3.
Please tighten the focus & zoom wheel screw after the adjustment
in
CAMERA LENS SETTINGS
1/3” Panasonic Progressive CMOS Image Sensor
2.1M Pixels Full-HD Video resolu on
Supported true day & night func on (only D/T model)
Supported DC-IRIS func on (only D/T model)
Supported 8 areas privacy masking
Supported ca
tle display
Supported BLC
Supported DSS
Supported WDR
Supported High Light Masking
Supported DNR & 3D DNR
Excellent Video Quality of 1080p 30fps/25fps & 720P 60fps/50fps
Supported Analog Composite Video Out simultaneously for easy service & easy camera installa on
IP 66 Compatible
4.
Please close the dome bubble cover.
O.S.D
1.
1.
1.
1.
1.
1.
