background image

CCTV

Model:

VIS238D

Colour Varifocal Dome
Camera

CCTV

Model:

VIS238D

Colour Varifocal Dome Camera

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

CCTV

Model:

VIS249DX

Colour 500TVL Varifocal
Dome Camera

CCTV

Model:

VIS249DX

Colour 500TVL Varifocal Dome

Camera

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local
distributor.

LIMITED WARRANTY:

This product is supplied with a 3 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.

Before you begin

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

8

Summary of Contents for VIS249DX

Page 1: ...ll types of cameras have difficulty in seeing with such a large lux level variation CCTV Model VIS249DX Colour 500TVL Varifocal Dome Camera CCTV Model VIS249DX Colour 500TVL Varifocal Dome Camera Manufactured exclusively for Xvision Europe Group Head Office London U K Email info x vision co uk Web www x vision co uk TECHNICAL SUPPORT For Technical Support for any Xvision product please contact you...

Page 2: ...an Xvision Pixel Varifocal lens which allows easy selection of the optimum viewing angle required during installation It will provide images in light levels as low as 0 1 lux The camera is designed for internal use and for ceiling mounting Very High Resolution CCD sensor provides great quality Colour images in light levels of 0 1 lux and above Discreet styling for unobtrusive low profile use inclu...

Page 3: ...tch Setting 5 1 Flickerless Function Set switch OFF FL to Flicker to enable flickerless function In this mode the switch AES OFF is auto disabled Turning On this function will show you an alternative colour balance under some lighting conditions 5 2 AGC Hi AGC Lo Function Adjusting the switch to AGC indicates AGC Hi and in the OFF position indicates AGC Low In AGC Hi mode the maximum AGC gain is a...

Page 4: ...ew Next make the Focal Adjustment by rotating the screw TELE Anti clockwise WIDE Clockwise until you get the desired view as shown in Figure 4 4 Tighten the two screws then replace the dome cover How to Operate 4 Adjust the camera viewing angle by first tilting STEP 1 then rotating the camera module STEP 2 and then turn the horizontal adjustment ring STEP 3 to correct the image and achieve proper ...

Reviews: