background image

CCTV

Model:

VIS238D

Colour Varifocal Dome
Camera

CCTV

Model:

VIS238D

Colour Varifocal Dome Camera

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark, 

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

CCTV

Model:

VIS249D-2

Colour 500TVL Auto Iris
Varifocal Dome Camera

CCTV

Model:

VIS249D-2

Colour 500TVL Auto Iris 

Varifocal Dome Camera

Before you begin

Please unpack the box carefully and identify that all the parts are present.

Do not cut the camera cables, this will void the warranty.

Make sure you use only the recommended power supply. Damage caused to the camera by 

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor use only. Please bear in mind the following points when
choosing a mounting position.

The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

Avoid viewing areas where half the area is in bright sunlight and the other half is dark, 

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with 
such a large lux level variation.

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your 
local distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty. The Warranty excludes 
products that have been misused, (including accidental damage) and 
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the place 
of purchase.

Manufactured exclusively for Xvision - www.x-vision.co.uk

UK/Europe

Xvision Group (UK)
Unit 2, Valley Point, 
Beddington Farm Road,
Croydon
Surrey. CR0 4WP
Email: [email protected]

Far East

Kyoung Am Building
157-27 Samsung-dong
Kangnam-ku
135 090 Seoul
Korea
Email: [email protected]

Middle East

Burjuman Tower, 
18th Floor
PO Box 121828
Dubai 43659
United Arab Emirates
Email: [email protected]

North America

100 Park Avenue
New York City, 
New York 
10017
United States
Email: [email protected]

Summary of Contents for VIS249D-2

Page 1: ...oltage or wiring is not covered by the warranty The camera is suitable for indoor use only Please bear in mind the following points when choosing a mounting position The camera must be positioned so that it will not point directly into the sun sunrise and sunset or any bright light as this may cause damage to the camera Avoid viewing areas where half the area is in bright sunlight and the other ha...

Page 2: ...ny 1 3 Super HAD CCD sensor and has an Xvision 4 0 to 9 0mm Pixel Auto Iris Varifocal Aspherical Lens which allows easy selection of the optimum viewing angle required during installation It will provide images in light levels as low as 0 1 lux The camera is designed for internal use and for wall or ceiling mounting Very High Resolution CCD sensor provides great quality Colour images in light leve...

Page 3: ... Designed for internal use only 1 Select a suitable position on the wall or ceiling to install the camera 2 Rotate the dome housing counterclockwise to remove it from the camera housing 3 Secure the camera in the desired ceiling position with the four fixing screws as shown in Figure 1 Figure 1 Installation 6 3 4 Once the picture appears on the monitor open the cover and make the Zoom Adjustment b...

Page 4: ...ct the video output to the monitor or other video device through a 75 Ohms type coaxial cable 2 Connect the audio output optional to the monitor or other video device using the phono connection 3 Connect the power source insert the AC plug into the AC socket and the DC plug into the DC Jack 12V DC in jack centre Audio Out to Monitor or other video device Video Out to Monitor or other video device ...

Reviews: