AM003-2XU-002 brief user manual
一、
Brief introduction
This product is an RF2.4G + BLE double-sided keyboard remote control, the
power button is RF2.4G communication mode, can switch the terminal device (smart
box), and other buttons are BLE communication mode. The receiver is built into the
device terminal board, and the remote is only the transmitter. The remote control
has one-way voice, air mouse, low power detection and other functions.
二、
Basic instructions for remote control
1.battery installation:
Open the battery cover at both ends of the remote control, and then press the
battery polarity indicator inside, insert two 7-cell batteries, and then install the
battery cover.
2.Pairing:
The remote control is one-to-one paired with the terminal device.RF2.4G, and the
BLE portion is respectively paired with the device. When the device is turned on,
power on remote control and press any button, remote control will connect with
device automatically.
RF2.4G part of the remote control: If the remote controller needs to be re-paired
with other devices, the terminal device needs to be restarted,and power on remote
control, press the power button, the remote control will enter the pairing state and
be paired with the terminal device.
BLE part of the remote control: If the remote control needs to be re-paired with the
device, press and hold [HOME] and [RETURN] on the A side of the remote control at
the same time for 3 seconds, after the BLE work indicator on the front of the remote
control flashes three times to enter pairing mode. The long light enters the pairing
state, and the remote controller enters the broadcast pairing request state. During
the pairing time, the terminal device searches for the Bluetooth device name of the
remote controller and selects to connect with it.
Remote control automatically exits the pairing state if it is not paired in 60 seconds
in paring state.
Bluetooth device name: BLE RCU
3.Air mouse function:
Air mouse function is turned off by default when the remote control is powered on.
Press air mouse button on A side to turn on/off air mouse function. When air mouse
is on, OK button is left mouse button. Press up/down/left/right button to turn off air
