Xulux Pty Ltd
14/388 Newman Road
Geebung
4034
Australia
Tel:
(07) 3172 7131
Fax:
(07) 3161 5598
www.xulux.com.au
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring regulations.
Due to our policy of continual product improvement Xulux reserves the right
to alter the specification of this product without prior notice.
FM 45789
EMS 534520
detection pattern
LOAD
8 Amp resistive and incandescent lighting
4 Amp fluorescent lighting
3 Amp compact fluorescent lighting
3 Amp low energy lighting
3 Amp low voltage lighting (switch primary of transformer)
3 Amp fans and ventilation equipment
Switch SON lighting loads via a contactor
SUPPLY VOLTAGE
220 -240 Volts AC 50 Hz
TIME OUT PERIOD
Adjustable 10s to 30m
LIGHT LEVEL
Light to dark
TERMINAL CAPACITY
2.5 mm
2
MATERIAL
Flame retardant ABS
TYPE
Class 2
TEMPERATURE
-10°C to 35°C
CONFORMITY
EMC -89/336/EEC
LVD -73/23/EEC
specification
description and operation
BT-PIR108
Ceiling PIR Presence Detector
The BT-PIR108 presence detector is designed to provide automatic control of lighting, heating or ventilation
loads. It detects movement using a PIR sensor and turns the load on. When an area is no longer oc-
cupied the load will switch off after an adjustable time out period.
An adjustable internal light sensor provides additional energy saving in lighting applications. When an
area is occupied lighting is only switched on when the level of natural light is below a preset level.
When the unit is first powered up the PIR sensor will always detect immediately regardless of whether
the room is occupied.
wiring diagram
dimensions