Xtreme Power Conversion Corporation
XPRT 6kVA & 10kVA User’s Manual
Page 51
Uninterruptible Power Supply
RS232 COMMUNICATIONS
To change settings of the UPS, we strongly recommend to be sure that the UPS is in standby mode. Some settings
can only be changed if the UPS operates in bypass or standby mode.
NOTE
The change of some settings can cause the unit to switch from bypass to standby and output
power is lost.
For more information regarding possible settings, please refer to the HELP manual on the UPS Monitoring Software
CD.
SNMP Interface Card (Option)
This card allows the data interface to be connected directly to an Ethernet network. The card is fitted into the
SNMP Card Slot. For more information, please refer to the user manual that comes with the interface card.
Extended Runtime
Extended runtime can be obtained by connecting a separate extended battery pack to the UPS. In this case the UPS
must be informed about the new total battery capacity to allow a reliable recalculation of the available runtime
(via UPS Monitoring Software). Depending of the charge condition of the new batteries the new runtime calcula-
tions may temporarily be unreliable.
Additional batteries increase the recharging time for the unit; all other operational information is the same as
for standard models. The following table shows runtimes with up to 3 Battery Packs. 1 Battery Pack is the normal
configuration.
