Xtreme Manufacturing XRM945, Operation & Safety Manual

Page: 30 / 76

Page 30
Xtreme Manufacturing, LLC
Operator Cab XRM 9 45
Operator Cab
 Warning
A brief description of controls,
indicators, and instruments is provided
as a convenience for the operator.
These descriptions DO NOT provide
complete operation instructions. Read and under-
stand the entire manual to prevent equipment
damage, injury, or death.
Ignition Switch
A key is required to operate the Ignition switch.
Figure 6-1. Key and Ignition Switch.
The Ignition switch has four (4) positions: OFF, RUN,
PREHEAT, and START.
Table 5. Ignition Switch
Position Purpose
OFF Shuts down entire electrical system, except the horn
and accessory outlet.
RUN All controls and indicators are operable.
PREHEAT Use for cold starting conditions.
START Engages starter motor to crank engine.
NOTE:
The PREHEAT and START positions are spring-
loaded. When the key is released, the Ignition switch will
automatically return to the RUN position.
Figure 6-2. Ignition Switch.
Accessory Outlet
A 12 Volt accessory outlet is provided as a power source
for personal items, such as a radio or cell phone.
Figure 6-3. Accessory Outlet.
Accelerator Pedal
Press the accelerator pedal to increase engine speed. The
accelerator pedal is spring-loaded to return to idle speed.
Figure 6-4. Accelerator Pedal.