XR5919-A 15
Warning
A brief description of controls, indicators, and instru-
ments is provided as a convenience for the opera-
tor. These descriptions DO NOT provide complete
operation instructions. Read and understand the
entire manual to prevent death, serious injury, or
equipment damage.
Ignition Switch
The ignition switch has three (3) positions: OFF, RUN,
and START.
Ignition Switch
Position
Purpose
OFF
Shuts down entire electrical system,
except the horn and accessory outlet.
RUN
All controls and indicators are operable.
START
Engages starter motor to crank engine.
The START position is spring-loaded. When the switch is
released, it will automatically return to the RUN position.
Figure 4.1 – Ignition Switch
Accessory Outlet
A 12 Volt accessory outlet is provided as a power source
for personal items, such as a radio or cell phone (10
amps max).
Accelerator Pedal
Press the accelerator pedal to increase engine speed.
The accelerator pedal is spring-loaded to return to idle
speed.
Chapter 4 – Controls
Figure 4.2 – Cab Floorboard
Service Brake Pedal
Press the service brake pedal to slow or stop the forklift.
The service brake pedal activates the service brakes on
the front (2) wheels.
Steering Wheel
Turn the steering wheel left or right to steer the forklift in
the corresponding direction. It is equipped with a quick
one-hand turn knob and a horn button.
Figure 4.3 – Steering Wheel
Horn Button
Press the horn button to sound the horn.
Ignition Switch
Accelerator Pedal
Service Brake Pedal
Turn Knob
Horn
Accessory Outlet
Summary of Contents for XR5919-A
