manualshive.com logo in svg

XtraVac XtraVac860A, Manual, Page: 14 / 49

Share
Download
XtraVac XtraVac860A Manual Download Page 14

 

 

13 

 

Part list 

 

                           

Adjusting valve

                                        

FRL 

 

No. Description(C10) No.  Description(C6) 

1 

Air inlet 

1 

Air inlet 

2 

Pressure gauge 

2 

Pressure gauge 

3 

Adjusting knob 

3 

Adjusting knob 

4 

Air outlet 

4 

Oil cup 

 

 

5 

Oil adjusting knob 

 

 

6 

Oil filling hole 

 
 

4.2 Maintenance: 

 

4.2.1 Cleaning of vacuum chamber 

4.2.1.1 If the working process is finished, use clean and wet cloth to wipe the vacuum 

chamber and sealing set. 

4.2.2 Vacuum oil replacement. 

4.2.2.1 Recommended vacuum oil: BP Engergol RC100, Esso Nuto H100, Mobil Rarus 427. 

4.2.2.2 Drain the oil completely before filling new oil. 

4.2.2.3 Oil capacity should be kept at least two-thirds of total amount.  

4.2.3 If the heat-resistance cloth on the heater is damaged, please replace it immediately. 

4.2.4 Change the oil of the vacuum pump for every 300 hours. If the packaged product is full 

of juice, shorten the oil replacing cycle time. Also check the oil level from oil sight 

glass every week. Oil capacity should be kept at least two-thirds of total amount. If the 

oil is dirty, please replace it immediately. 

Summary of Contents for XtraVac860A


















































Reviews:

No comments