Xtramus MCS-2160 User Manual Download

Page: 13 / 79

1.3.3.1. System Module Cards

A. System Module Card – XC-SFAN

The

XC-SFAN

comes with your MCS-2160 chassis, and shall be installed on the

Fan

slot located on the

far left side of MCS-2160 chassis. This module card provides ventilation for the MCS-2160 chassis.

Also, XC-SFAN’s

CTRL + PWR

and

PWR

ports are designed to provide power source and gather

information for MCS-FANT fan tray. When connecting XC-SFAN to MCS-FANT fan tray, please do so by
connect to MCS-SFAN’s

CTRL + PWR

port to MCS-FANT’s

CTRL + PWR

port, and XC-SFAN’s

PWR

port to MCS-FANT’s

PWR

port.

If you cross connect between

CTRL + PWR

port and

PWR

port of XC-SFAN and MCS-FANT, MCS-2160

will be seriously damaged.

Interface Ports

CTRL + PWR

8-Pin Mini-Din Port which can provide power for MCS-FANT and
system information regarding to MCS-FANT

PWR

8-Pin Mini-Din Port which can provide power for MCS-FANT

LED

Green ON

XC-SFAN is power on

Power

Green OFF

XC-SFAN is power off

Green ON

XC-SFAN is powering up properly

Sys

Green OFF

XC-SFAN is power off

Status 0

User-defined LED

Status 1

User-defined LED

*Note: XC-SFAN does not support hot-swap. Please do not draw the XC-SFAN module card from
MCS-2160 chassis when the system is power on.

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

Summary of Contents for MCS-2160
















































































Search results

Summary of Contents for MCS-2160

Reviews:

Related manuals for MCS-2160

Brands by name

Popular brands

Xtramus MCS-2160, User Manual

Search results

Summary of Contents for MCS-2160

Reviews:

Related manuals for MCS-2160

Brands by name

Popular brands