Xtralis ADPRO PRO E, Installation Manual

Page: 9 / 50

ADPRO PRO E by Xtralis Installation Guide
27386_05 3
1.7 Environmental protection
1.7.1 Damage to environment
ATTENTION:
Risk to environment through improper use!
Improper use of substances that are hazardous to the environment, and in particular their
improper disposal, can cause substantial environmental damage.
Hence:
l
Always follow the instructions in this guide
l
Initiate appropriate measures immediately if environmentally hazardous substances are
released into the surroundings. Inform the responsible local authority of the damage in case
of doubt.
1.8 Transportation, Packaging and Storage
1.8.1 Transportation
Note: To prevent damage, all components should always be transported in their original packaging.
1.8.2 Packaging
l
Packaging
Detectors and their accessories have been adequately packaged for proper transportation/warehouse
storage. Only eco-friendly materials have been used for packaging.
Packaging protects against damage during transit, corrosion and other damage, and should not be
destroyed or disposed off.
l
Handling packaging materials
If packaging materials are no longer needed nonetheless, you must dispose of the packaging materials in
keeping with applicable statutory regulations and local guidelines.
WARNING:
Environmental damage through improper disposal!
Packaging materials are valuable raw materials which can often be used, recycled and reused
in many instances. Please dispose of packaging materials in an environmentally friendly
manner.
Please comply with local disposal regulations.
l
Unpacking
Detectors are typically delivered as an individual product along with instructions for use; no further
documentation comes with the product. Documentation and resources, such as the latest version of the
planning and installation guide, ADPRO PRO PIR e-data sheets and e-brochures, drivers and software
tools etc., can be downloaded free of cost from the Xtralis Security Solutions Support Site at
www.xtralissecurity.com
While unpacking the detector, please take the usual electrical and electrostatic (ESD) precautions by
providing sufficient earthing, and observe applicable work safety guidelines.
CAUTION:
Dismantling the detector may lead to permanent damage or even loss of warranty.
Operating a detector outside the operating voltage or temperature range specified for it can also
lead to permanent damage.
A detector contains sensitive electrostatic components and should be handled accordingly.