Xtralis ADPRO PRO E, Installation Manual

Page: 13 / 50

ADPRO PRO E by Xtralis Installation Guide
27386_05 7
l
EN 61643-11 Overvoltage protection devices for L.T.
o
Section 11 - Overvoltage protection devices for use in L.T. systems - standards and test procedures
l
EN 61643-21 Overvoltage protection devices for L.T.
o
Section 21 - Overvoltage protection devices for use in telecommunications and signal-processing
networks – performance standards and test procedures
These instructions do not claim to be complete and must be supplemented if necessary with other local,
national and international standards (such as VdS Guideline VdS 2833, overvoltage protection measures for
alarm/fire extinguisher control systems or VdS Safety Guidelines Perimeter VdS 3143).
Recommendation
You can request more information and professional advice from the following manufacturer:
S SÖHNE GmbH + Co. KG.
Hans-Dehn-Str.1
D-92318 Neumarkt
Postfach 1640
D-92306 Neumarkt
Tel.: 0049 (0)9181 906-0
Fax: 0049 (0)9181 906-1100
E-Mail: info@dehn.de
Contact: www.dehn.de/de/kontakt
2.4 Detector Assembly
Notes:
l
The range of ADPRO
®
PRO E-detectors offered is extensive, and we can cover only basic mounting
here.
l
Installation instructions for each product must be followed with respect to detector dimensions, attaching
parts and specific features.
l
The stipulated mounting height of 2.5 m to 4 m above ground should be maintained. 4 m is the minimum
height at which the detector operates at its standard maximum range and is also optimally tamper-proof.
2.4.1 Assembly material provided
Before installation, check whether all required materials have been supplied with the detector.
1. Panels
2. Cable seal
3. Molding: straight and rounded
4. Hexagon socket screws with washers