Chapter 9
Other Functions
Owner’s
Manual of BECS- A15 Computerized Control System
67
9.2
Set Frame Origin
Setting the frame origin is the premise for saving the pattern’s start point and setting
frame protection at sudden power-off. So after the installation or maintenance of machine,
it’s
necessary to set the frame origin.
1.
Press
to enter the interface for other functions.
2.
Press
to enter debugging interface.
3.
Select
“Auto
Find Origin
Point”
System will move the frame automatically and determine the origin according to the
limit switch. So please ensure that the limit switch has been installed into the machine and
activated.
