38
Owner’s
Manual of BECS- A15 Computerized Control System
Note: the number, name and current value of each parameter are displayed in the
parameter list window.
5.1
Procedure for Setting General Parameters
The setting procedure is similar for each general parameter. You can follow the guide
of this section to set all parameters.
1.
Select Parameter Type
User can use the keys at the bottom of the screen (parameter type key and page
key) to look for the parameter.
If you want to modify the number of needles whose parameter number is D01,
press
to find machine configuration parameter and the its parameter list will be
displayed.
2.
Press the parameter to be set and input the new value by the number keys.
Chapter 5
Settings of
Embroidery Parameters
