C
hapter 4
Common Parameters
and Color-Changing Order
32
Owner’s
Manual of BECS- A15 Computerized Control System
4.1.3.
Pattern Direction
4.1.4.
Prior Mode
There are two modes: “rotation prior to scaling” and “scaling prior to rotation”.
When
user has set the parameters “Scale X/Y” and “Rotate Angle”, the patterns will rotate
first and
then scale up/down, if “rotation prior to scaling” mode is selected. Otherwise it
will scale up/down first and then rotate.
4.1.5.
Rep. Mode
There are two repetition modes: normal and partial.
4.1.6.
Rep. Order
There are two modes: X first and Y first.
Rotate 30 degrees
Design start bit
