38
2. If the ABS tablet, ABS pump, brake master cylinder, brake cylinder,
brake line, or brake fluid is replaced, the ABS bleeding function must
be performed to bleed the ABS.
3. After the oil in the brake oil tank is seriously insufficient or the brake
fluid is replaced, ABS Bleeding is also required
When performing ABS Bleeding, it is necessary to unscrew the exhaust screw of the ABS
pump.
After completing the tire pressure sensor learning, it takes a while for the fault light to go
out.
Tire pressure imbalance will also cause the tire pressure light to light up.
INJECTOR CODING
This function can write the identification code of the fuel injector into
the ECU so that the ECU can recognize and work normally. Write
injector actual code or rewrite code in the ECU to the injector code of
the corresponding cylinder to more accurately control or correct
cylinder injection quantity.
After the ECU or injector is replaced, the injector code of each cylinder
must be confirmed or re-coded so that the cylinder can better identify
injectors to accurately control fuel injection.
After cleaning, generally, there is no need to do the coding matching function.
The identification of the fuel injector includes its working accuracy value and type value.
When replacing it, you need to find the corresponding model for replacement.
At present, mainstream cars support injector coding function
GEARBOX MATCH
After changing the gearbox or changing the gearbox ECU, you need
to use the gearbox matching function to re-match the engine and the
gearbox.
