Operation
Starting operation
Observe correct mains voltage! The voltage of the power source must agree
with the voltage specified on the nameplate of the machine. Power tools
marked with 230 V can also be operated with 220 V.
Switching On and Off
To start the machine, push the On/Off switch forwards.
To lock the On/Off switch, additionally push down the front of the switch.
To switch off the machine, release the On/Off switch. When
the On/Off switch is locked, press on the rear of the switch and then release
it.
To save energy, only switch the power tool on when using it.
WORKING ADVICE
Before any work on the machine itself, pull the mains plug. Apply the power
tool to the workpiece only when switched on. Guide the power tool at an
angle of 80 to 90° to the surface of the sheet metal and do not tilt it to the
side.Guide the machine evenly and with light feed in the cutting direction.
Excessive feed significantly reduces the service life of the saw blade and
can cause damage to the power tool. When cutting curves, make sure not to
tilt the power tool laterally and work with low feed rate only.
Maximum Steel Sheet Cutting Capacity
The maximum steel sheet cutting capacitydepends on the strength properties
of the material to be cut. The machine allows for cutting of metal sheet to 1.6
mm thicknesses
.
It is designed for fast chipless cutting and cutting of solid
and perforated steel sheets and sheets (aluminum, copper) of non-ferrous
metals. Not suitable for stainless steel.
Summary of Contents for XT106335
Page 6: ...Rozkres...
