9
can function with much less current (>400mA). Please use a
compatible power source cable (not provided) to connect the
external DC power source with the power input jack of the
XtendLan Cam, making sure that the polarity is correct.
Note: The power connector is a 4.0x1 .7mm coaxial DC power plug
with
positive”tip” (inside pin) polarity (Radio Shack P/274-1532 or
equivalent). If both an external power source is connected and
batteries are installed, the XtendLan Cam will be powered by the
external power source. When the batteries become weak, the low-
battery indicator LED will glow blue, indicating the batteries should
be changed.
Inserting the SD Card
The XtendLan Cams have 32MB internal memory, which can hold
only about 1 8 photos (12MP resolution). This is handy for testing
and getting familiar with the camera, but you will no doubt want to
leave the camera unattended for longer than a day, so using an
SD card is recommended. Insert the SD card (with the
camera’s
power switch in the OFF position) before beginning to operate the
camera.
Don’t insert or remove the SDcard when the power
switch is in the ON position. The XtendLan Cam uses a standard
SD (Secure Digital) memory card to save photos (in .jpg format)
and/or videos (in .asf format). SD and SDHC (High Capacity)
cards up to a maximum 32GB capacity are supported. Before
inserting the SD card into the card slot after opening the
camera's front cover, please makesure that the write-protect switch
on the side of he card is"off" (NOT in the"Lock"position). Following
describes how to insert and remove The SD card:
•lnsert the SD card into the card slot with its label side upwards
(see above). A"click" sound indicates that the card is installed
successfully If the wrong side of the card is facing up, you will
not be able to insert it without force-there is only one correct
way to insert cards. If the SD card is not installed correctly, the
device will not display an SD card icon on the LCD in SETUP
mode (the SD card icon displayed after switching to SETUP
mode will have a"lock" symbol inside it in it if the cans locked).
Formatting the SD card by using the XtendLan Cam's
"Format"parameter before using it for the first time is
recommended, especially when a card has been used in other
devices (see "Changing Menu Parameter Settings"for
details) .
•To take out the SD card, just gently push in the card (do not try
to pull it out without pushing in first). The card is released from
the slot and ready to be removed when you hear the click.
WARNING
Be sure the
camera’s power is switched OFF
before inserting or removing SD cards or batteries.
