Set Clock
Set
Press OK and use the UP/DOWN keys (to change the
setting) and LEFT/RIG HT keys ( to move to the next
ield) to set the hour (24-hr format only, "00"-
midnight,"12"=noo and minute, and then (on the lower
row), the year, month and date.
Turn Timed Scan recording mode on/off . When
activated, Timed Scan forces the camera to take photos
or videos even when it is not triggered by a nearby live
MOUNTING AND POSITIONING the XTENDLAN CAM
Mounting
After
you’ve set up the camera’s parameters to your personal preferencesat
home or in your truck,
you’re ready to take it outside and slide thepower
switch
to”ON”. When setting up the XtendLan Cam for scouting game or
other outdoor applications, you must be sure to mount it in place correctly
and securely. We recommend mounting the XtendLan Cam on a sturdy
tree with a diameter of about 6 in. (15cm). To get the optimal picture q uality,
Set Timed Scan or,off
Set Video Sound On,Off
Password Set
On,Off
animal, useful for constant monitoring of an area that
might be far away from the camera. The user can set
the start and stop times for up to two independent
"blocks" of Timed Scan recording, as well as the
interval time between each photo/video.
Press "on" the camera will record the sound when in
video mode. Press "off" the sound will be closed.
Select "on"
set
a
password
then input
the
password.Select "off" to close the password function.
Select"Execute"and press OK to restore all parameters
to the original factory default settings. If the camera is
the tree shou Id be about 16-17 ft. (5 meters) away from the place to be
monitored, with the camera placed at a height of 5-6.5 ft. (1.5-2 in). Also,
keep in mind that you will get the best resu Its at night when the su bject is
within the ideal lash range, no farther than
45’(14m)and no closer than 10’
(3m) from the camera.
There are two ways to mount the XtendLan Cam: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable web belt: Fig. 5 illustrates using the web belt on the
XtendLan Cam. Push one end of the belt through the two brackets on the
back of the XtendLan Cam. Thread one plastic buckle part onto each end of
the belt. Fasten the belt securely arou nd the tree trunk by clicking the
buckle ends together after tighten ing the belt so there is no slack left.
Default
Cancel,
Execute
behaving oddly and you think you may have changed
the setting for something accidently (but
aren’t sure
which one), this will reset all parameters to their most
commonly used or " generic" settings.
