IN-USE
POWER
MEM
DPA-MEM User Manual
1.
Introduction
The DPA-MEM module is designed for system
with public memory sharing, all monitors
connected to t h e system can view the
recorded pictures saved in DPA-MEM unit. Note
that the DPA -MEM is for
DPM-443SM and
DPM-443SMP
monitors application only.
2.
Terminal Descriptions
LED Indicator
1 2 3 4
DIP ON
DC SETUP
JS-VP(OUT) RS485
JS-OS(IN)
IN-USE:
Status indicator,it will light up or blink when receives signal.
POWER:
Working indicator,it will light up when plugs in power supply.
DC:
Power supply input port.
SETUP:
DIP switches,refer to table 1 for detail information.
RS485:
Used to update program for DPA-MEM.
JS-OS(IN):
Input port,connect to door station.(if multi door stations are
installed,connected to
DPA-5C-MDS
)
JS-VP(OUT):
Output port,connect to indoor monitors.
Table 1
DIP State
DIP Code
Description
0000
PAL standard working mode
0100
NTSC standard working mode
0xx1
Format flash,IN-USE LED indicator
will slowly blink for 5s.
Note:1. For other DIP states,the functions are reserved.
2."x" means that the DIP switches are not restricted.
