Page 65
1
=== Monitor Program ===
Old M. code [ - - - - ]
New M. code [ - - - - ]
>Press Call Button of the
monitor
>Input new Code
>Press # to Program
[ Press Call Button ]
5)
Now Set the new room address for the monitor navigation button, and press menu button to
save the setting
Code Number:
[ 002]
0010: delete remotes
0011: add remote
0020: set as door bell
0021: not door bell
0022: have door station
0023: no door station
0030: out-delay set
0031: in-delay set
0080: room id set
0090: test armed
0093: direct call gl vd on
0094: direct call gl vd oV
8008: MM/DD/YY YY
8009: DD/MM/YY YY
8012: 12 hour format
8013: 24 hour format
2412: restore to default
4.3.3
Address Setting with door station
Monitor address also can be set via door station. The steps as follows, take DPC-518ID as an example:
Step1: Entry Monitor Program Page
R F CARD
1 2 3
4 5 6
7 8 9
[----]
R F CARD
1 2 3
4 5 6
7 8 9
[--------]
* 0 #
* 0 #
Please Input Passw ord
Please Input Passw ord
Press # key on
door station
Then input 8003
Input the password:
66666666(Default)
Then entry Monitor
Program page
Summary of Contents for CAT-5 wired
Page 1: ...CAT 5 video intercom system Technical guide...
Page 10: ......
