B) Address Configuration
It is recommended that you use a common private network for the LAN side of the
DSL modem/router, for example 10.10.10.0/24, and use 10.10.10.1 for the DSL
device and 10.10.10.2 for the EdgeXOS appliance.
Then configure the one-to-one NAT rule on the DSL device to forward all traffic from
the public IP address to the 10.10.10.2 address of the EdgeXOS appliance.
The following diagrams demonstrate how the network should look when this
installation is performed correctly.
Physical Configuration
Logical Configuration
