Xorcom XP0150G User Manual Download

Page: 78 / 126

User Guide

Xorcom XP0150G IP Phone

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

The icon appears on the LCD screen.

You can also configure auto answer via web user interface at the path

Account

Note

Auto Redial

You can enable the auto redial feature to redial the phone number automatically
when the called party is busy. You can also configure the times of the auto redial and
the time to wait between redial attempts.

To configure auto redial via phone user interface:

Press

Menu

Features

Auto Redial

Press or , or the

Switch

soft key to select

Enable

from the

Auto Redial

field.

Enter the desired time in the

Auto Redial Interval

field (the default time interval is

10s).

Enter the desired times in the

Auto redial times

field (the default times are 10).

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

You can also configure auto redial via web user interface at the path

Phone

Features

General Information

The auto answer feature is not applicable to answer another incoming call
automatically when there is an active call on the phone.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands