Xorcom XP0150G User Manual Download | Manualshive

Page: 121 / 126

background image

Regulatory Notices

115

Regulatory Notices

Service Agreements

Contact your reseller for information about service agreements applicable to your
product.

Limitations of Liability

TO THE FULL EXTENT ALLOWED BY LAW, YEALINK EXCLUDES FOR ITSELFAND ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDINGNEGLIGENCE), FOR
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OFANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION
ORDATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
SALE,INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF
ITS PRODUCTS,EVEN IF YEALINK OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCHAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR
REFUND OF THE PURCHASERICE PAID, AT YEALINK’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BEAFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL
FAIL OF ITS ESSENTIAL PURPOSE.

Safety Instructions

Save these instructions. Read these safety instructions before use!

The following basic safety precautions should always be followed to reduce risk of fire,
electrical shock, and other personal injury.

General Requirements



Before you install and use the device, read the safety instructions carefully
and observe the situation during operation.



During the process of storage, transportation, and operation, please always
keep the device dry and clean.



During the process of storage, transportation, and operation, please avoid
collision and crash of the device.



Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.



Without prior written consent, no organization or individual is permitted to
make any change to the structure or the safety design of the device.
Yealink is under no circumstance liable to consequences or legal issues
caused by such changes.



Please refer to the relevant laws and statutes while using the device. Legal
rights of others should be respected as well.

Environmental Requirements



Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.



Keep the device dry and free of dusts.

«
...
119
120
121
122
123
...
»

Summary of Contents for XP0150G































































































































Reviews:

No comments

Related manuals for XP0150G

Brand: Galaxy Pages: 58

Brand: Ratel Pages: 2

Brand: Blu Pages: 31

AQUOS ZETA SH-09D

Brand: Docomo Pages: 45

Brand: Plum Pages: 17

Brand: HME Pages: 2

Brand: Pantech Pages: 70

Brand: NAPCO Pages: 16

Brand: Samsung Pages: 149

Brand: Samsung Pages: 60

Brand: Zte Pages: 88

Brand: Geemarc Pages: 69

Brand: Geemarc Pages: 81

Clearsound CL8400

Brand: Geemarc Pages: 102

X-style 33 Steel

Brand: Sigma Pages: 17

Brand: Cisco Pages: 1

Brand: Huawei Pages: 22

Brand: Huawei Pages: 63

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands