Xorcom UC912G User Manual Download Page 140

Page: 140 / 165

UC912G IP Phone

Page 140 of 165

Paging

With this feature, you can call all members of a paging group.

Configuring Paging using the phone interface

Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2 (for
example)

Press Left arrow or Right arrow key or press Switch soft key to select the Paging in the Type
field.

Enter the paging code followed the number.

Press Left arrow or Right arrow key to select the Account ID.

Press OK or Save soft key to save the configuration

Configuring Paging using the web interface

Click Function keys → Line Key.

Select a Line key and select Paging in the Type.

Enter the paging code followed the number.

Select the Account.

Click the SaveSet button to save the configuration.

Summary of Contents for UC912G


























































































































































Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands

Xorcom UC912G, User Manual

Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands