Xorcom UC912G User Manual Download Page 130

Page: 130 / 165

UC912G IP Phone

Page 130 of 165

Call Forwarding

If a key is configured as Forward key, press this key under the idle status, the IP phone will turn to
the Always Forward interface and you can set the Forward To number, so that any call will be
forwarded automatically.

Configuring Call Forwarding using the phone interface

Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2 (for
example)

Press Left arrow or Right arrow key to select the Forward in the Type field.

Enter the Number to forward to.

Press OK or Save soft key to save the configuration

Configuring Call Forwarding using the web interface

Click Function keys →Line Key.

Select a key and select Forward in the Type.

Enter the Value with the number you want to forward to.

Click the SaveSet button to save the configuration.

Summary of Contents for UC912G


























































































































































Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands

Xorcom UC912G, User Manual

Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands