Hardware Overview
LED
Power Indicator:
Solid green when power on, flashing red when the call is ringing(can be
customized).
Line Keys: Solid green:
Dialing or during a conversation.
Flashing red:
Ringing.
Off:
Idle interface.
Place a call
Three ways to make a call:
Handset:
Pick up the handset; enter the number, then press the send soft key or press
.
Speaker:
Press
or the line keys; enter the number, then press the send soft key or press
.
Headset:
Press
; enter the number, then press the send soft key or press
.
Note:
You can also use directory contacts or call log to dial the number: select entry and press dial key to
diall the call. More, you can also switch the mode during the call.
End a call
To end a call in three different modes:
Handset:
Hang up the handset or press the cancel soft key.
Speaker
:
Press
, or press the cancel soft key.
Headset
: Press the cancel soft key.
Answer a call
Handset:
Pick up the handset.
Speaker
:
Press
.
Headset
:
Press
.
Note: You can reject the call by press the Reject soft key.
Redial
Press
to redial the last call you dialed.
Hold
Press
or the hold soft key during a call to hold the call.
Press
or the resume soft key to resume the held call.
Call Transfer
⚫
Blind Transfer
1) Press
or Transfer soft key during the conversation, the call is on hold now.
2) Enter the number you want to transfer to.
3) Press
or the B Transfer soft key and now the blind transfer completed.
⚫
Attended Transfer
1) Press
or Transfer soft key during the conversation, the call is on hold now.
2) Enter the number
you want to transfer to and press the send soft key or
.
3) Start the second conversation, press
or Transfer soft key, then Transfer completed.
⚫
Semi-Attended Transfer
1) Press
or Transfer soft key during the conversation, the call is on hold now.
2) Enter the number
you want to transfer to, and then press
, then you can hear the ring tone.
3) Press
or the Transfer soft key and now the Semi-attended Transfer completed.
Call Conference
Assuming that A and B are in A conversation. A want to bring C (or D & E) in a conference:
1) A presses Hold, the call is placed on hold.
2) A presses New Call, enter the number of C and then press send soft key or
, C answers the call.
3) A presses
or the conference soft key, then A, B and C are now in a conference.
4) If add D&E, A press Hold, the current conference is on hold, press New Call and dial D, D answer
the call. A Press Hold and New Call and dial E, E answer the call. A press
, then A, B, C, D, E
are in a conference.
Note:
1) If C does not answer the call, A can resume the conversation with B.
2) Once A hangs up the call, the conference ends. If B or C drops the call, A&C or A&B can
continue the conversation.
Call Mute
Press
to mute the microphone during the call.
Press
again to un-mute the conversation.
Instruction
PM1004 UC505 Getting Started Guide_English_Global Rev.01
