XOR electronics Nerdseq User Manual Download Page 65

Page: 65 / 133

To disable a value so it is not changing the parameter when the patch is being called you use

SHIFT+DELETE.

You can pre-listen the current selected FX/Function by pressing

OK.

Use

SHIFT+OK

to pre-listen

the complete patch. Not all patch effects can be pre-listened as they rely on the current playback.

In the

→ Nerd Screen / Menu

(

SHIFT+NERD

) you can choose to add a patch name which helps

to identify different patches.

Current Values Screen

The current values screen shows the recent values/settings of the current track.
It can be accessed from the

→ Sequencer Screen

or the

→ Pattern Screen

(if not on the patch

column and not on CV16 Pattern screen) by pressing the

PATCH

button.

The screen is updating live and all values can directly be manipulated by selecting the needed
parameter and change the value by using

SHIFT+ UP/DOWN/LEFT/RIGHT

Your current value will be overruled if the sequencer is running and the value is being changed by
the sequencer. Beside the parameter change, some values can also be started/triggered with this
feature. For this you use the

button to start/trigger the parameter/function.

Be aware that the current settings are the real settings without any post-modulations.

NerdSEQ – a tracker based Eurorack sequencer

Page 65

User Manual Revision V1.26 for Firmware V1.26

12 July 2022

Figure 15: Current Values Screen

Summary of Contents for Nerdseq






































































































































Search results

Summary of Contents for Nerdseq

Reviews:

Related manuals for Nerdseq

Brands by name

Popular brands

XOR electronics Nerdseq, User Manual

Search results

Summary of Contents for Nerdseq

Reviews:

Related manuals for Nerdseq

Brands by name

Popular brands