Hi-Fi Bluetooth Speaker
RS7720
User manual
To Our Valuable Customer
Key and Connection
Turn ON/OFF and Bluetooth pairing function
Function Description
Safety
Connect to Bluetooth devices
Trouble shooting
Other play back feature
Trouble shooting
Package Accessories
Thank you for choosing our Wireless portable speaker.
This model uses a high capacity Polymer Lithium battery,with the super
low bass
And also comes with noise reduction technology,
It is compatible with most of the Bluetooth frequency and support A2DP.
So that you can enjoy the pure HIFI sound quality and it has build in
microphone wireless Bluetooth function.Please read the menu carefully
before uses the unit and keep the menu in a safe place.
1. Do not turn the volume to the maximum level,because it may harm to
the hearing.
2. Keep unit away from the moisture environment,sand or other
electronic devices.
3. Use the wet cloth to clean up this product,but do not use alcohol,
winde.
4. The unit was charged 50% of battery on the production line.In order
to maintain the battery life,it requires charging the battery in full before
use the product.
1. About the charging indicator light
a. Charge to 25%-50%,25% the
corresponding indicator turn into a
constant ligh;50%,the corresponding
indicator is flashing.
b. Charge to 50%-70%,50% the
corresponding indicator turn into a c
onstant ligh;75%,the corresponding
indicator is flashing.
c. Charge to 75%-100%,75% the
corresponding indicator turn into a
constant ligh;100%,the corresponding
indicator is flashing.
Previous blue indicator show: wireless
audio connection device,wireless Bluetooth
connection device that could only connect
to the previous Bluetooth device (Mobile
phone).
Previous indicator blue and red flashing
show: wireless audio connection device,
wireless Bluetooth connection device is
rebooting.
Previous red indicator show: Charing
1. Hold ON/OFF,until a “Dong” sound, blue indicator,Bluetooth speaker
could connect to the previous connected device.
After reboot,press ON/OFF momentarily, until a “du” sound, blue and
red flashing,the state of Bluetooth pairing,and the mobile phone can pair
with HI-FI now.
2. At sate of power on,hold ON/OFF,until a “dong” sound,red indicator,
power off
3. At the state power on,Bluetooth connection (play),all of a sudden call,
end play music self-motion,turn to be calling prompt,press phone key
momentarily pick up,the microphone work.Press phone key
momentarily 2 times,redialling the last called.Press the Phone key,hang
up,turn to play. Calling,end play music self-motion,turn to call prompt,
hold Phone Key 1s,reject call,turn to play.
4. Hold Increase volume button,the voice become louder and “dong
dong dong…” Indicator when reach the loudest.Hold decrease volume
button,the voice become smaller,and reach the lowest when “dong
dong dong” showed.
5. Turn to play next song when press increase volume momentarily:
Press decrease volume momentarily to play previous song.
6. The voice of speaker can be control by Mobile phone or Bluetooth
device.
① Indicator ② Phone ③Decrease Volume/Move to Previous
④ON/OFF ⑤Increase Volume/Move to Next
⑥Headphone Jack ⑦Play or Pause
1
2
3
7
4
6
5
d. Charge to 100%,the four indicators all constant light.
2. About the power indicator light (power indicator switch)
Press switch on,the indicator show the power:
When power over 75%,the four indicators light on.And so on,the
product is standard charge cable (USB-A interface-USB-A interface).
25%
50%
75%
100%
7. If you hear the “du du du du…”Indicator,the battery is low and
requires charging of the device.
In order to maintain the power of rechargeable battery last longer,you
need to charge and discharge battery every 3 months,even you do
not use it.
There are many applicable Bluetooth devices in the market,we show
IPHONE as a demon stration below:
*You may require password,if needed,please input 0000.
*Always follow operation guidance on the phone.
If you want to connect a new Bluetooth connection,you must make sure
the Bluetooth in the state of pairing standby mode,and the AUX interface
do not connect any audio device.
1. Hold Bluetooth function button for a few seconds until previous
indicator red and blue lights flashing
2.Open IPHONE
3.Follow the steps to activate the IPHONE Bluetooth function:
Open set up menu
Choose the regular menu-Bluetooth
Set up the Bluetooth open on state
IPHONE begin to search and obtain the Bluetooth device on the list;the
speaker is named S7720 on the list of Bluetooth device,the state is
without paired,without connection.
4. Open the matching connection.Iphone viewing screen will indicate
connected,the previous indicator blue start flashing slowly.At this time
could start playing music,for example,the function operation on Iphone
could transfer to speaker.
If set up the sound to halt condition in careless,only if open the power,
Bluetooth reactivation and the paired Bluetooth devices are in the work
range,the speaker will connect the last connection device automatic;
Previous indicator will red flash for a short time.Once the speaker is
reconnection successfully,previous indicator turn to blue.
*If the LINE IN interface of speaker have audio connected device,speaker
will default voice frequency first play.this time,Bluetooth device be
disconnected,unless remove LINE IN connection,otherwirse the
transmission could not recover.
Play music
The speaker could play all different formats that your device supported.
It also support new A2DP standard format.At present,there are lots of
devices could be supported by mobile phone,which is special researched
and developed for transfer wireless stereo signal device by Bluetooth.
You may need manual activation for your smart mobile phone’s
transmission that should transfer by A2DP. For this,you can refer to
the relevant guidelines of your smart mobile phone to gain the more
information.
Base on the issue of versions on smart mobile phone,sometime,it may
not play music directly.Under the circumstances,you need operate by
hands,and then you could pause or replay the music in any device.
1. Start the music playing
2. Turn on the relevant function of your smart phone to play.
3. In the situation of Bluetooth connected and playing:
Stop Playing,press Pause button momentarily,the music pause.
Resume play,press Pause button momentarily again,the music play.
4. Volume Control
Hold on the Increase Volume button,the sound gradually louder,till have
a voice “Dong Dong Dong…”,reach the loudest.Hold on the decrease
volume button,the sound gradually smaller,till have a voice “Dong Dong
Dong…” reach the smallest.
5. Conversation
It could use as a hands-free device,build-in microphone.
Pick up call
The music will automatically disconnect when there is an incoming call,
and the phone ringing transfer to speaker.
Pick up call: press phone button momentarily,the phone will transfer to s
peaker,you can use the internal microphone to hands-free conversation.
You could choose in your smart phone to pick up phone by speaker or
phone.
6.Hung up or reject call
When there is call,hold phone button to hang up.
You could connect your phone which is without Bluetooth function to
speaker device directly,but you need have an audio cable that both ends
with 3.5mm diameter of the plug.
Please follow your phone operational guideline to operation.
As to through LINE IN connecting base to connection’s device,you can
only use the volume control of audio device (As mobile phone) to
control the volume,and the start and stop of music could only be
controlled by audio device.
Can’t operate in the normal condition
1. 1s that enough battery power? Connect the unit to the computer
by USB cable
2. 1s that power off or stay on standby mode? Turn on the device and
pairing it again
3. 1s that within the receiver distance? Move devices close to the device
Can’t connect with Bluetooth
1. Did the Bluetooth compatible with the cell phone? Refer to cell
phone menu for more information
2. Did the Bluetooth activate from the cell phone? Turn on the
Bluetooth function from the cell phone and confirm the pairing is
successfully from the device. Otherwise, refer to the page 4” connect
to Bluetooth device”
3. Did the pairing password been enter? Check and confirm with devices
Cannot play music
1. Did the device have the playback software? Refer to the device menu
and follow the instruction on playback music option
2. Did the playback set on pause mode? Press the play/pause button
from RS7720
3. If the volume of play device is too low
4. Did the volume adjust too low or on mute on the device and the
TOP-X6?
5. Did the LINE IN input been connected? The Bluetooth playback will
stop if the LINE IN input connected
6. Did the battery in low condition? Charging is required
Play back stop
Check battery condition, charging required if the battery low
1. Use a suitable audio cable,one end connect to mobile phone
headphone output hole,and the other one end connect to LINE IN
connecting seat of speaker.
2. Turn on the speaker and mobile phone.
3. Click on the audio device to play music.
4. Control the volume in Audio device.
*Please turn off them before disconnect speaker and audio device.
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
